Installation

                             

Fitting instructions for self adhesive type mirror glass.

Thoroughly clean and dry surface to which replacement glass is to be fitted. We recommend you use clean water and dry with a soft cloth. Carefully remove any loose glass and dust off any small particles. Do not apply outdoors in damp or cold conditions. Do not remove any glass unnecessarily. Where the original glass is bonded to the door mirror assembly, this will provide a sound base onto which the new glass will adhere.  The adhesion of the pad is very strong. If need be, practice to ensure that you can align the glass in the correct position before removing the backing paper from adhesive pad and fitting.

        

Fitting instructions for mirrors with plate.

Remove the existing broken glass and backing plate. Disconnect plug connections for mirror heating. If necessary please clean mirror housing. Next inspect received back plate, heater connectors position and mirror glass. Then push the mounting plate into the mirror shell and make sure it clips in fully.Then connect heating wires to the connectors at back of the mirror. Please be aware that adhesive pad at the back of the mirror is very strong. If need be, practice to ensure that you can align the glass in the correct position before removing the protective foil from adhesive pad and fitting. You don't need to apply any additional glue or sealant.